Insulform Heat Shrink Tubing, 16 to 14 AWG, Black, 1/4" Diameter, 2' Length, 1/4" ID Before and 3/32" ID After Shrinkage (Pack of 5)

SKU: P68795

Short Description:

Product Information & Features

• 3:1 shrink ratio

• Seals and helps protect electrical connections against failure due to water, moisture, corrosion, vibration, strain and abrasion

• The inner wall melts and adheres to the wire or cable insulation, encapsulating the connection; the outer wall shrinks, providing strength with flexibility and abrasion resistance

• Unaffected by most oils, fuels, solvents, chemicals and road salts

• High dielectric strength: 5,100 – 21,300V/mil minimum, depending on tubing diameter and amount of shrinkage

• Flame-resistant – meets CSA (OFT) and UL flammability ratings

• Easy to apply, low shrink temperature: 230°F (110°C)

• High tensile strength: 1,500 PSI minimum

• Wide continuous temperature range: –67°F to +230°F (–55°C to +110°C)

• Rated at 600V, 125°C

• Meets MIL Specification 123053/4, Class 3

Applications

• Communications wire/antenna cable

• Instrumentation/electronics

• Vehicular electrical splices

• Biomedical instruments

• Solder and crimp joints

• Wire/cable strain relief

• Power cable splices

• Harness jackets

• Insulate splices

• Insulate tools

• Buss bars

• Burial capable

Wire gauge coverage is approximate due to the wide variance of wire thicknesses.

Price not available

Registered Member? Log In to purchase.